Saturday, September 24, 2011
quick wheel clean
after wipping off a thick layer of dirt and brake dust, i was reminded that my wheels are closer to silver rather than brown
Leaky Boot
My MINI has sprung a leak in the boot. I think it may be the infamous third brake light gasket. It was pretty bad during the hurricane weather a few weeks ago. This morning I had some water in there too!
Tuesday, September 20, 2011
Monday, September 19, 2011
STI is back...maybe
3 damaged bumpers later (on the 4th), I should have my STI back tomorrow! (crosses fingers)
Sunday, September 18, 2011
installed new prosport boost guage
so the VDO that I had was tired (dropped like 3 times on pavement) and was reading off. Decided it had come to an end of it's useful life. It had been in Guin's WRX, my WRX, and my MINI.
I replaced it with a cheap Prosport mechanical boost guage. All the connections swapped over. I wired it up for amber lighting.
Guage when "off"
Guage when "on"
I replaced it with a cheap Prosport mechanical boost guage. All the connections swapped over. I wired it up for amber lighting.
Guage when "off"
Guage when "on"
Gauge at night
It reads "0" when off unlike the VDO which still read 1-2 PSI from being dropped. After changing the SC/serpentine belt, the car hits target boost, idles smoother, and pulls a lot harder all the way to redline. So far I am happy.
Saturday, September 17, 2011
Wednesday, September 14, 2011
boost leak - pending
So I've had a boost leak in the MINI for almost a year now. It occurred after I installed my intake. I checked the hoses for leaks, checked my intake connections, and then later changed out my old BPV with a Detroit Tuned one because the OEM one was leaking. Still short a few PSI.
I was googling the past few days and people were mentioning how their SC belt could slip without making squeeling sounds and that the best and cheapest first place to check other than for boost leaks is to check the tension on the belt and the belt. I still have a new replacement belt for my alta pulley, so I am going to change it out this weekend. Luckily I bought the tensioner tool a year ago so it should make the belt swap easy.
I will post follow-up once done if it solves the issue!!! (crosses fingers!)
I was googling the past few days and people were mentioning how their SC belt could slip without making squeeling sounds and that the best and cheapest first place to check other than for boost leaks is to check the tension on the belt and the belt. I still have a new replacement belt for my alta pulley, so I am going to change it out this weekend. Luckily I bought the tensioner tool a year ago so it should make the belt swap easy.
I will post follow-up once done if it solves the issue!!! (crosses fingers!)
Subscribe to:
Posts (Atom)





